High-tech injection-moulded parts finished to a high quality

Topic of the month

© MBFZ toolcraft GmbH

Toolcraft is active in the area of injection moulding and mould making © MBFZ toolcraft GmbH

Toolcraft has been active in the area of injection moulding and mould making since 2005, covering every step of the supply chain. The company's fields of expertise range from standard thermoplastics and high-temperature materials (PEEK) to insert moulding and multi-material injection moulding.

The total solutions offered have now been extended, as thanks to its collaboration with Wohlrab Aufdampftechnik GmbH, toolcraft is able to provide high-quality finishing of high-tech injection-moulded parts.
© MBFZ toolcraft GmbH

"We derive particular benefits from each other in the research and development of plastic components and the finishing of these parts," states Christian Wohlrab, managing director of Wohlrab © MBFZ toolcraft GmbH

A versatile partner

Wohlrab Aufdampftechnik finishes the surfaces of sophisticated technical and decorative plastic parts. The company's robot-controlled finishing systems enable components used in the medical technology industry to be finished precisely and in a completely reproducible manner. During this process, the company uses a variety of biocompatible finishes and colourants.

In addition to performing pad printing with up to six colours for photo-quality images, gold plating is also available on request. This is not only visually attractive, but also allows sensors to reflect infrared light. The anti-reflective and scratch-resistant coatings offered fulfil the stringent requirements of the automotive industry and are widely used in the optical industry as well.
© MBFZ toolcraft GmbH

Bernd Krebs, managing director of toolcraft: "Thanks to our collaboration with Wohlrab GmbH, we are now able to provide high-quality finishing of injection-moulded parts." © MBFZ toolcraft GmbH

Success in exceptional methods

A PVD coating protects electronic components and shields them from electromagnetic radiation. Wohlrab coats metals using a sputtering process performed in its own specially developed systems. In contrast to conventional evaporation, this type of coating can be applied in a fully reproducible manner.

"While evaporation involves pure metal being evaporated using heat and being condensed onto the pre-treated plastic components, sputtering bombards solid metal sheets (known as targets) with ions, which causes high-energy particles to be released," explains Christian Wohlrab, managing director of Wohlrab GmbH.

"These particles concentrate in front of the target in the form of a cloud, through which the parts to be coated can then be moved. The coatings created in this way not only adhere considerably better to the pre-treated parts, but the process can also be used to apply metal alloys." The company also specialises in ITO coating – a conductive coating which, unlike metal layers, is transparent.

Collaboration to bring mutual success

The benefits of the partnership are particularly clear in the field of hearing aids, as here the processes offered by the two companies are being expanded by each other's portfolio. Toolcraft can now finish high-tech plastic components for use in the medical industry to a high quality – by means of either a decorative finish or by a nanocoating which makes them resistant to environmental factors.

In return, Wohlrab can from now on draw on toolcraft's expertise in the plastic injection moulding of extremely small parts. The partnership is bringing a host of benefits in other areas as well.
© MBFZ toolcraft GmbH

The injection moulding at toolcraft © MBFZ toolcraft GmbH

Advantages beyond the processing of plastics

The companies derive particular benefits from each other in the research and development of plastic components and the finishing of these parts. Further points of contact are in the field of robotics, the control and automation of production steps as well as regarding 3D prototyping.

Toolcraft already uses a 3D printing process to manufacture high-tech metal precision components which are ready for the production line – and is able to reproduce the entire process chain in house. Wohlrab uses this technology to produce plastic masks and mechanisms.

The masks are used to cover areas of the plastic components that should not be refined, while the mechanisms are used to fix parts during the coating and finishing process. The partnership has also helped the two companies to work on a more international scale.
© MBFZ toolcraft GmbH

The final inspection of painted hearing aid shells at the Batam production site of Wohlrab © MBFZ toolcraft GmbH

Joint venture in Singapore

Increasing internationalisation can be observed in the area of injection moulding in particular. Since Wohlrab already has offices in Singapore and Indonesia, a joint project in Singapore could be set up relatively quickly. Toolcraft exports nearly one-third of its products abroad to countries like Switzerland, the UK, the United States, Singapore and South Africa.

This share will continue to grow in the coming years. In order to gain a foothold in the Asian market, toolcraft has now established a company in Singapore in collaboration with Wohlrab – Toolcraft Wohlrab Technologies Pte. Ltd.. In the future, its production site in Indonesia is due to be used for plastic parts production, surfaces coating, as well as the assembly of complete units.

The parts will be specially produced to meet the needs of the Asian market. The aim of opening an additional toolcraft facility in the heart of Asia is to reduce the need for wasteful and costly logistics activities and, in turn, to safeguard jobs in Middle Franconia, Germany.
© MBFZ toolcraft GmbH

Wohlrab's production site in Indonesia (near Singapore) © MBFZ toolcraft GmbH

Editor: Frank Lindner