Dongying Cheonseng Precision Foundry Co., Ltd.

No 183, Xisan Rd., Dongying, Shandong, 257067 Dongying
China
Telephone +86 546 7779958
Fax +86 546 7779959
info@cs-cast.com

Location

Hall map

NEWCAST 2015 hall map (Hall 14): stand A51-5

Fairground map

NEWCAST 2015 fairground map: Hall 14

Our range of products

Product categories

  • 01  Ferrous castings - Iron, steel and malleable foundries
  • 01.02  Production processes
  • 01.02.004  Investment casting

Our products

Product category: Investment casting

CARBON STEEL INVESTMENT CASTINGS

Carbon steel investment castings may be selected for your saving cost. Because we provide castings to net shape, we can eliminate most, if not all secondary machining operations.Providing a net shape to typical casting tolerances of +/-.005" per inch, Cheonseng Precision Foundry has proved time and time again that sand castings, forgings, and machined components can be converted to carbon steel investment castings with significant cost savings.We also have the capabilities of furnishing secondary operations such as machining, plating, heat treatment and assembly. Our cosmetics are as good as any foundry can offer, better than most.

Stainless Steel Castings
Heat Resistant Steel Castings
Carbon Steel Castings
Tool Steel Castings
Cobalt Based Castings
Nickel Based Castings
Metal Castings
Lost Wax Investment Castings
We cast carbon steel from miniature to 80kgs.

More Less

Product category: Investment casting

HEAT RESISTANT STEEL SERIES

We can manufacture all kinds of heat treatment basket, grate, base tray and bracket, we export 300 Tons of this serie every year, and we’re greatly experienced in this field. The materials we usually use include SCH-13, 21, 22, 24, IN519, NW22, 1.4828, 1.4833, 1.4841, 1.4845, 1.4861, 1.4864, 1.4876, 1.4878, 1.4885 etc. We can meet the standards of ASTM, AISI, BS, DIN, JIS & NF.

Heat resistant steel casting parts are more heat resistant than other material castings, widely used for heat treatment furnace, drive shaft, conveyor belt, bearing frame, power plant, incinerators, cement industry, heat treatment industry, work machinary industry and related heat treatment equipment.

Our Heat Resistant Steel Series Features:
-High oxidative stability and tarnish resistance
-Free of deformation
-Fine surface finish, excellent dimension and tolerance control
-Packing: protection film and fumigated wooden pallet or as per requested

Maximum Dimensions We Can Do (mm): 1200*800*380
Weight Range: 0.1~50 Kg
High Temperature Resistance: Above 600℃
Yield Strength σs:235~275 Mpa
Tensile Strength б b: 390~490 Mpa
Tensile Stretch δ %: 5~13

Heat Treatment Basket

This category is used heat treating specialty components. The baskets are loaded with parts then placed in a hot furnace. After thermal treatment, the baskets are lifted out of the furnace and set into a quench tank, usually containing either water or oil. The grid configuration allows both the heat and quench media to completely surround the parts, giving a homogenous thermal treatment to the parts.

Heat Treatment Base Tray

This category is placed inside of a larger, open-topped basket and are used to support parts while they are in a heat treating furnace. The large, open slots in the bottom allow the heat and furnace atmosphere (carburizing, nitriding, etc.) to circulate freely around the parts.Heat Treatment Furnace Rail
This category is typically attached to the heat treating furnace floor using bolts. Small, statically cast rollers or wheels are then placed into the spaces along the top side of the rail. Heat treat trays are loaded with parts and are pushed or rolled along the rails into and out of the furnace.

Hanger Bracket
This category is bolted into the inside of a high temperature furnace. They are then used to secure other structural members inside the furnace, such as tube sheets and supports.

Heat Treatment Furnace Door Damper
This category is used to either control the temperature and air flow within a high temperature furnace or used to open and close the end of a furnace to allow product to move in and out. The ends of the shaft portion are machined to allow them to be installed in bearing housings and an actuator is attached to the back, with pins, to cause the damper to move.

Stainless Steel Castings
Heat Resistant Steel Castings
Carbon Steel Castings
Tool Steel Castings
Cobalt Based Castings
Nickel Based Castings
Metal Castings
Lost Wax Investment Castings
We cast heat resistant steel from miniature to 80kgs.

 

More Less

Product category: Investment casting

STAINLESS STEEL INVESTMENT CASTINGS

Cheonseng Precision Foundry Co.,Ltd.. has experience pouring a wide variety of stainless steel alloy casts. The popular alloys we have poured are listed below. We are also capable of pouring other air melt alloys upon your request. Specific material chemistry and mechanical specifications will be provided to you if needed. For your stainless steel castings needs, Cheonseng Precision Foundry can help you out. Stainless Steel Castings
Heat Resistant Steel Castings
Carbon Steel Castings
Tool Steel Castings
Cobalt Based Castings
Nickel Based Castings
Metal Castings
Lost Wax Investment Castings

More Less

About us

Company details

Cheonseng Precision Foundry Co., Ltd locates in the central city of the Yellow River Delta
Dongying where lies China's second largest oil field Shengli Oil field. It is only three hours' drive
from Dongying to Qingdao port which enjoys high popularity in the world, which endows us with
the geographical edge over other competitors in the same industry.

As a major manufacturer of investment castings, we adopted the lost-wax process to serve a
huge variety of markets that require metal parts in carbon steel, stainless steel and different
kinds of alloy steel, including construction hardware, marine hardware, kitchen hardware, pipe
fittings, auto parts, railway parts and other machinery parts. We are able to supply precision
castings in many conditions involving heat treated, machined, electropolished, mirror polished
and so on.

Excellent employees and advanced management guarantee our superb products at most
competitive prices. We currently have more than 100 employees and an annual capacity of over
400 MT precision castings per year, of which over 90% are exported to Europe, America,
Australia, South Korea and Japan.

Our company culture is "Precision Makes Difference". This idea runs through every aspect of
operation, from company management to product manufacturing, quality control and inspection;
from employee training and technique requirement to customer service, we keep pursuing
precision, which makes us different from others. We aim to make it easier for our customers to
purchase quality products from a reliable manufacturer that passed ISO9001, and we are sure
you will find it worthwhile to choose us as your supplier.

Please contact us and let us know how we can serve you.

 

More Less