WIRE d.o.o.
Limbuska cesta 2,
2341
Limbus
Slovenia
Slovenia
Location
Hall map
Fairground map
Our range of products
Product categories
- 04 Metallic charge materials
- 04.01 Charge materials for iron, steel and malleable iron casting
- 04.01.05 Inoculants
Inoculants
- 04 Metallic charge materials
- 04.01 Charge materials for iron, steel and malleable iron casting
- 04.01.06 Nodularizing additions for spheroidal graphite cast iron
Nodularizing additions for spheroidal graphite cast iron
Our products
Product category: Nodularizing additions for spheroidal graphite cast iron
WINOD type: WLS 1325
The wire filler is composed of the FeSiMg filler materials. The classical filler composition provides calm reaction, good utilisation of Mg, and low-cost metal treatment. The wire is suitable for treating the molten synthetic metal with S < 0.25% content in induction furnaces.
Product category: Nodularizing additions for spheroidal graphite cast iron
WINOD type: WLS 3325
The wire filler is composed of the FeSiMg alloy. The filler composition provides calm reaction and very good utilisation of Mg. The molten metal, treated by such a wire, is not very much inclined to shrinkage cavities. The wire is primarily suitable for molten synthetic metals, molten metals with a high content of scrap steel, molten in induction furnaces; S < 0.030% content.
Product category: Nodularizing additions for spheroidal graphite cast iron
WINOD type: WLS 3316
The wire filler is composed of the FeSiMg alloy. The composition ensures extremely calm reaction and very good utilisation of Mg. It is suitable for treating the molten synthetic metal in induction furnaces. It gives good results also in the event of desulphurised hot metal with S < 0.02% content from cupola furnaces.