Manage stand orders
Select Option

Sati Group S.p.A.

Via C. Bonazzi 24, 40013 Castel Maggiore (BO)
Italy
Telephone +39 051 700321
Fax +39 051 701350
marketing@satigroup.it

Hall map

METEC 2019 hall map (Hall 3): stand E47

Fairground map

METEC 2019 fairground map: Hall 3

Our range of products

Product categories

  • 01  Plant and equipment for processing prime and raw materials
  • 01.01  Handling of ores, coke and other prime materials

Handling of ores, coke and other prime materials

  • 02  Plant and equipment for iron making
  • 02.04  Components, ancillary equipments

Components, ancillary equipments

  • 13  Miscellaneous equipment for metallurgical plants and rolling mills
  • 13.02  Lifting and conveying systems
  • 13  Miscellaneous equipment for metallurgical plants and rolling mills
  • 13.04  Transport and storage techniques

Transport and storage techniques

Our products

Product category: Lifting and conveying systems

Uniflat – nastro strisciante UNIPORT® Sliding Belts

they are available in two versions:

UNIFLAT: Y abrasion-resistant cover, for the conveying of materials without oil or grease

UNIFLAT OILPLUS: Oil-proof cover and skim to avoid swelling even from the bottom side, suitable for conveying oily materials, especially for the recycling plant and waste disposal, etc.

More Less

Product category: Lifting and conveying systems

Unicalor – nastro anticalore UNIPORT® Heat and flame resistant belts

o decrease the damage to the conveyor belt due to the transport of hot material, we can offer our line of heat resistant belts, where a special cover protects the carcass of your conveyor belt from the high temperatures:
UNICALOR HR1: The UNICALOR HR1 is suitable for conveying hot material, with a maximum operating temperature of 120°C
UNICALOR HR2: The UNICALOR HR2 is suitable for conveying hot material, with a maximum operating temperature of 150°C
UNICALOR HR-OIL: The UNICALOR HR-OIL - is suitable for conveying oily and hot material, with a maximum operating temperature of 130°C and peaks of 150°C (example: asphalt).
UNICALOR HR3: The UNICALOR HR3 - EPDM based cover is suitable for conveying hot material, with a maximum operating temperature of 180° C and peaks of 400°C. Besides a great resistance to the heat, this cover has also a good abrasion resistance (~130mm3).

More Less

Product category: Lifting and conveying systems

Unibreak – passo stretto grado X UNIPORT® Cut and rip resistant belts

To avoid or limit cuts and rips to the conveyor belt caused by edgy material, or badly loaded material on the conveyor, the core of the belt is protected by transversal metal wires inserted over the plies and a special rip and abrasion resistant top cover Y. This allows you to defend the heart of your belt and your work. These belts can work on classic diameters of drums. The UNIBREAK is produced in two versions: UNIBREAK - Diameter of the steel wire 1,35mm and pitch of 8,0 mm UNIBREAK F -Diameter of the steel wire 1,35mm and pitch of 3,0 mm The carcass of these conveyor belts is made of a composition of polyester fabrics E in warp and in weft polyamide P, resistant to atmospheric agents such as moisture. This structure ensures a high tensile strength in the longitudinal direction and a transverse high flexibility.

More Less

About us

Company details

Founded in 1964 as a result of the strategic foresight of Gianni Tonelli, today Sati Group spa has grown considerably, thanks to the guidance of son Riccardo and daughter Silvia Tonelli, who carry the company tradition with professionalism, innovation and enthusiasm.

More Less