FURNTECK ENGINEERS PVT. LTD.

Gat No.244/1, Near Courtyard Marriot, Chakan-Talegaon Road, Khalumbre, Chakan,, 410501 Pune
India

Hall map

GIFA 2019 hall map (Hall 11): stand F65

Fairground map

GIFA 2019 fairground map: Hall 11

Contact

GIRISH VISPUTE

Phone
+919850499663

Email
girish@furnteck.com

Our range of products

Product categories

  • 02  Melting shop
  • 02.03  Fuel-heated melting and holding furnaces
  • 02.03.01  Crucible melting and holding furnaces, fuel-heated
  • 02  Melting shop
  • 02.03  Fuel-heated melting and holding furnaces
  • 02.03.02  Hearth-type melting and holding furnaces, fuel-heated

Hearth-type melting and holding furnaces, fuel-heated

  • 02  Melting shop
  • 02.03  Fuel-heated melting and holding furnaces
  • 02.03.04  Bale-out furnaces, fuel-heated

Bale-out furnaces, fuel-heated

  • 02  Melting shop
  • 02.03  Fuel-heated melting and holding furnaces
  • 02.03.05  Melting and holding furnaces, fuel heated

Melting and holding furnaces, fuel heated

Our products

Product category: Melting and holding furnaces, fuel heated

TOWER TYPE MELTING FURNACE - ST


FURNTECK ENGINEER’S ECOMELT series furnaces can dramatically reduce your aluminum melting costs by increasing energy efficiency and reducing melt loss. When compared to a crucible, barrel, rotary, or reverberatory (reverb) furnace, a ECOMELT can reduce energy consumption by 50% or more, reduce melt losses by up to 80% and reduce emissions while delivering better metal quality. In comparison to an electric aluminum melting system, energy costs are less than 1/3 with comparable results on metal cleanliness and melt loss.

Aluminum Melting Efficiency
- <575KWH per Ton of fuel consumption for continuous melting.
- < 1% melt loss.
- Tapped metal temperature control to +/- 10º C.
- Higher quality metal with lower gas inclusion levels.
- How does an ECOMELT Furnace achieve these results?

  • Direct Waste Heat Recovery by charging material into the melting shaft without the high maintenance costs associated with add-on recuperation equipment.
  • Full pre-heating of charge is achieved via the waste flue gases in the melting shaft of furnace. This process of preheating burns off all impurities present on the charged material and removes the moisture content as a result of which the fuel consumption is reduced and any chance of explosion is eliminated.
  • Automated charging system ensures full level of melting shaft charge to get optimal efficiency.
  • Rapid aluminum melting in the melting zone of furnace in an oxygen deficient atmosphere reduces melt loss. Aluminum Metal melts near instantaneously.
  • Complete independence of melting and holding furnace functions reduces energy requirement for melting and reduces super heating resulting in reduction of hydrogen/gas pickup.
  • High quality insulation reduces the heat losses.
  • PLC controlled system makes the operation very user friendly.
  • Stoichiometric tuning of burner systems.
  • Furnace is capable of being sealed to the extent that energy is not lost through charge wells or large furnace openings.
  • Positive furnace pressure can be achieved through controlling out going flue gases.
  • Wall to wall furnace access for ease of cleaning and maintenance by providing large doors.
  • Full pre-heating of charge material eliminates explosion hazards.
  • Automated charging eliminates hot metal splash risk to operators and reduces manpower required for loading.
  • Limited operator exposure to furnace internals.
  • Low shell temperatures prevent accidental contact burns and provides comfortable working environment.
  • Optional automated tapping systems for furnace.
  • Furnace is ergonomically designed.
Experience
Furnteck Engineers is in business since 1994 and has been pioneer in design develop and supply of TOWER TYPE MWLTING FURNACES to Indian market since 2001. Because of enriched experience, no other company can offer you the level of experience that Furnteck can and that is also at extremely affordable cost than any other comparative products available. Furnteck Engineers have built and installed more than 250Nos of stack / tower / shaft furnaces in India to most of the major die casting companies than all other manufacturers combined which itself is a certification for both our company and our technology.

More Less

Product category: Crucible melting and holding furnaces, fuel-heated

Melting Cum Holding Furnace

Our Melting cum Holding furnaces are highly energy efficient and can be connected directly to the casting machine. The auto-ladle of pressure die casting machine can be used for baleout. For gravity die casting units the metal can be baled out manually if required. The furnace can be supplied with several light / heavy and gaseous fuel options. The furnace is designed keeping in mind the easy operation / maintenance and oxide cleaning. This furnace will allow user to have high flexibility to treat several alloys and high energy efficiency.

More Less

Product category: Crucible melting and holding furnaces, fuel-heated

Reverbratory Furnace

These furnaces are suitable for HPDC / GDC shops where frequent change of alloys can not be avoided.  Being Batch type furnaces and higher  energy losses through flue gases, these furnaces are recommended only if continuous production is not possible or several alloys to be melted.

More Less

Product category: Crucible melting and holding furnaces, fuel-heated

Crucible type melting furnace

Crucible type melting furnaces are suitable for HPDC / GDC shops where production rates are very low or metal quality is extremely crucial and only electric melting is required. Being Batch type indirectly heated furnaces, the furnaces have comparatively higher energy consumption. Recurring cost of CRUCIBLE is also one of the concern since it drastically affects production in case of sudden failure.

More Less