Manage stand orders
Select Option

STOTEK A/S

Aage Grams Vej 1, 6500 Vojens
Denmark
Telephone +45 74 5401-39
Fax +45 74 5401-36
sales@stotek.dk

Hall map

GIFA 2019 hall map (Hall 11): stand D59

Fairground map

GIFA 2019 fairground map: Hall 11

Our range of products

Product categories

  • 10  Casting machines and pouring equipment
  • 10.03  Peripheral equipment and auxiliary materials for die casting (die casting dies see 17.03.01)
  • 10.03.01  Ladling and dosing equipment for die-casting

Our products

Product category: Ladling and dosing equipment for die-casting

Dosotherm® dosing furnace (DTE)

DTE Dosotherm®  is a high efficiency-dosing furnace featuring our unique, patented dosing system, where only the ceramic pump is pressurized for dosing metal.

DTE are from the automotive industry the preferred dosing technology for high quality aluminum parts like structure parts.

The furnace gives a extremely good metal quality because of the protected atmosphere and low energy consumption, and the best on the marked dosing accuracy lower than +/-1%.

Effective process – increase productivity to maximum output because faster cycle time / dosing time, filling and cleaning the dosing furnace doing production and with the new designed intelligent plc controlling system will help reduce unplanned production stop.

Due to the low volume required, the use of nitrogen or argon as the pressure medium is practical resulting in extremely clean metal.

All these benefits can help to reduce the total cost from 40% to 80 %

Benefit

  • Ensuring effective process for high quality aluminium like for structure part
  • Dosing accuracy better than +/- 1%
  • Faster dosing, cycle time 50%
  • Extremely energy and CO2 efficient by saving 40 up to more than 80% (saving from 3.500,- to 20.000,- EUR/year)
  • Increase productivity with the intelligent control system – less production stop
  • Metal temperature accuracy of +/- 1-degree C
  • Extremely low air consumption for dosing
  • Reduce yearly maintenance cost up to 50%
  • Better metal quality by using filter under the dosing pump
  • Increase safety with lower fill high – same or lower than the shut sleeve high
  • Providing strong, local customer support
  • Option: operate with degassing stone and protecting gas for dosing

More Less

Product category: Ladling and dosing equipment for die-casting

Alumelter electric dosing (AMED)

The AMED is an all-in-one electrically heated crucible furnace for holding, melting and dosing aluminum. The furnace is equipped with a STØTEK dosing pump that is renowned for exact dosing (+/- 1 %), and doses up to 25 kg/Al per shot. AMED has melting speed with up to 275 kg/Al/h.
The furnace ensures high metal quality, and is also perfect for special alloy containing sodium, strontium, or high quantities of magnesium.
Due to the furnace’s layers of high efficiency thermal insulation, it has a very low energy consumption.

The AMED all in one furnace has all the same benefit like DTE + the AMED also are a crucible melting and holding furnace.

Benefits

  • Melting and dosing in one furnace. Impress dosing accuracy <+/-1%
  • Special designed for special Alloys with high quantities of SR / MG.
  • Exact metal temperature
  • Energy-efficient – ensuring a minimum of 40% lower energy consumptions than other furnaces
  • Dosing weight from 1-25 kg/AL.
  • Digital PID controller ensures metal temperature regulation
  • PLC control allows up to 8 adjustments to the pouring speed
  • Metal filling from low height

More Less

Product category: Ladling and dosing equipment for die-casting

Alumelter gas dosing (AMGD)

STØTEK AMGD Alumelter-Dosing is an all-in-one gas heated crucible furnace for holding, melting and dosing aluminum. The furnace is equipped with a STØTEK dosing pump that is renowned for exact dosing (+/- 1 %), and doses up to 25 kg/Al per shot. AMGD has extremely effective melting speed with up to 450 kg/Al/h

The furnace ensures high metal quality, and is also perfect for special alloy containing sodium, strontium, or high quantities of magnesium.

Due to the furnace’s layers of high efficiency thermal insulation, it has a very low energy consumption.

STØTEK AMED all in one furnace has all the same benefit like DTE dosing furnace + that the AMGD also are a crucible melting and holding furnace. (Benefit like data from AMG furnace)

Benefits:

  • Melting and dosing in one furnace.
  • Impressive dosing accuracy <+/-1%
  • Unique design for special Alloys with high quantities of SR / MG.
  • Exact metal temperature
  • Energy-efficient – ensuring a minimum of 40% lower energy consumptions than similar furnaces
  • Dosing weight from 1-25 kg/AL.
  • Digital PID controller ensures metal temperature regulation
  • PLC control allows up to 8 adjustments to the pouring speed
  • Metal filling from low height

More Less

About us

Company details

Our furnaces come with many years of experience

When Ivan Byskov founded STØTEK in 1987, he already had many years of experience in the foundry industry. Since 1974, he had been working as a director at Vemak, later named El Monta.

When El Monta experienced a crisis, Ivan Byskov bought the stocks and founded STØTEK. The company’s first domicile was in Næstved.
Ivan Byskov established STØTEK’s business philosophy by focusing on professional support for the company’s customers, and the company’s motto was created: “By professionals for professionals”

In 2004, STØTEK expanded internationally by taking over Swedish Smältteknik and establishing STØTEK, Inc. in the USA. STØTEK moved into a new domicile in the industrial park in Vojens, allowing the company to increase its production.

In 2007, co-owner Hans Henrik Würtz bought the stocks and took over STØTEK.

To further strengthen the strategic work, STØTEK hired a professional board in 2011.

More Less