Beijing Holland Co., Ltd.

Room 2006, Building A, Vantone Square, No. 2 Fuwai Str., Xicheng Dist., 100037 Beijing
China
Telephone +86 10 68032755
Fax +86 10 68032878
market@bjholland.com

This company is main exhibitor of

Hall map

METEC 2019 hall map (Hall 3): stand E11

Fairground map

METEC 2019 fairground map: Hall 3

Contact

GANG HUANG

Phone
+86 18911802940

Fax
+86 10 68032755

Our range of products

Product categories

  • 02  Plant and equipment for iron making
  • 02.01  Blast furnace plants
  • 04  Plant and equipment for non-ferrous metal production
  • 04.02  Refining
  • 04  Plant and equipment for non-ferrous metal production
  • 04.03  Smelting
  • 04  Plant and equipment for non-ferrous metal production
  • 04.04  Hydro-metallurgy, electrochemistry

Hydro-metallurgy, electrochemistry

  • 04  Plant and equipment for non-ferrous metal production
  • 04.05  Aluminium retrieval/recycling
  • 06  Plant and equipment for casting and pouring of non-ferrous metals
  • 06.01  Ingot casting
  • 06  Plant and equipment for casting and pouring of non-ferrous metals
  • 06.02  Continuous casting

Continuous casting

  • 06  Plant and equipment for casting and pouring of non-ferrous metals
  • 06.03  Strip casting

Strip casting

  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.01  Hot rolling mills

Hot rolling mills

  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.02  Cold rolling mills

Cold rolling mills

  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.04  Wire mills

Wire mills

  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.05  Strip processing lines

Strip processing lines

  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.06  Dressing and finishing lines

Dressing and finishing lines

  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.07  Forging, extrusion and drawing machines

Forging, extrusion and drawing machines

  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.08  Reheating and heat treating furnaces

Reheating and heat treating furnaces

Our products

Product category: Aluminium retrieval/recycling

Ingot casting

The advantage of this new type machine is as below:

1. The ingot's crystal grains are fine and uniform.

2. High efficiency, highly automated and intelligent, safe to operate.

3. Simple process, less investment.

4. Good surface quality obtained, also there are no casting defects such as pores, leading edge etc.

5. Flexible for multi-product manufacturing

6. Finished ingot's shape facilitates the automatic stacking way

More Less

Product category: Aluminium retrieval/recycling

Aluminum strip casting mill

 

More Less

Product category: Aluminium retrieval/recycling

Pure aluminum CCR line

Application: 

By means of continuous casting & rolling, this line works to produce oil-free conductive aluminum rod in a diameter Ø9.5mm 、Ø12mm.




Brief Process flow:

Ordinary aluminum ingot and scrap →Melting furnace→ holding furnace→  4-wheel continuous casting machine → front drive unit → roller shears→ continuous rolling mill → cooling & lubricating device for aluminum rod → twin-basket continuous coiler→ oil-free aluminum rod


Molten aluminum or prepared aluminum melt flows from the holding furnace into the 4-wheel casting machine via the launder and is casted into trapzoid-shaped bar in a cross-sectional area of 2400mm2. Then Cut off the bar which does not meet the technical requirements with the roller shears, press the front end and feed it into the rolling mill. After milling is completed, the rod will be coiled into the basket.

More Less

Product category: Smelting

Effective Slag Recycling

The slags from steel and ferrous alloy can be used to make mineral wool (rock wool) in hot status directly from Submerged Arc furnace and blast furnaces. The most popular raw material is Manganese slag (Mn slag). It is of energy savings and environmental friend. The production cost is much lower than basalt rock wool.

More Less

Product category: Hot rolling mills, Continuous casting, Strip casting

Steel Rolling Mills

Beijing Holland will participate METEC, 25-29 June 2019, for the promotion of steel rolling mills for strip coil, plate, Rail, Piles,rebar and rod as well as universal profile rolling mill for I-beam, H-beam (IPE, HEA and HEB ), U-beam ( channel ), Angle and various shapes.

More Less

Product category: Strip processing lines

Strip & Foil Processing Machinery

Include: Horizontal continuous casting; Copper rolling mill; Aluminum strip machineries; Slitting line; Galvanizing/galvalume line; Packaging machine.

More Less

Product category: Blast furnace plants, Refining, Smelting, Ingot casting

Cupola and Induction Furnace for Casting

There are two major melting methods for ferrous casting, Cupola and induction furnaces. There are many factors for decision makers in trading off. Cupola is more used for high quality large quantity production. The induction furnace is good for medium and small scale production as well as alloy iron. The cupola plus induction furnace is superior for casting but only poor in cost control. The detailed comparison is summarized as follows:

 

Melting Mode Cupola Induction Cupola+Induction

Iron Gray cast iron; ductile iron; malleable cast iron; some medium and low alloy cast iron Alloy cast iron;gray cast iron; ductile iron; malleable cast iron; Alloy cast iron;gray cast iron; ductile iron; malleable cast iron;

Raw

materia

l Different proportions of scrap steel, chips, primary iron, and recycled materials can be used; the C and Si contents in the furnish can be significantly different from the molten iron; the slag iron and some pellets can be used; Less raw iron and the recycled material; consistent ingredient with molten iron; purification needed;charge quality sensitive Same as cupola

Batch Mass production Small and medium Any

size

Quantit

y Large Small and medium Large

Working

Mode Parallel, contiguous,sectional Sectional Contiguous, Parallel,Sectional

Automat

ion High low high

Electri

city Low high medium

Coke high no high

Skill

require

ment high low high

Investm

ent High for small quantity production Medium Very high

Product

ion cost Low low high

Melting

Quality High but need skill to control Low but easy to control High and easy to control

More Less

About us

Company details

Beijing Holland Co., Ltd. was established in 1997. It is a technology & trading company. It has two overseas sales & service offices, located in Mumbai India and Sao Paulo, Brazil. The head office is located in Beijing. For convenient trading, Chaina International Limited was found in 2001. It is the sister company of Beijing Holland Co., Ltd in Hong Kong.

More Less

Company information as a PDF file