FOUNDRY ECOCER S.r.l.
Viale Europa 64/66,
20010
Ossona - Milan
Italy
Italy
Location
Hall map
Fairground map
Our range of products
Product categories
- 02 Melting shop
- 02.06 Operating materials and supplies for the melting shop
- 02.06.04 Melt additives and covering fluxes for non-ferrous cast alloys
Melt additives and covering fluxes for non-ferrous cast alloys
Our products
Product category: Melt additives and covering fluxes for non-ferrous cast alloys
AL - CLEANING FURNACE WALLS
Very important the proper maintenance of melting furnace walls.
Dross formation and adhesion to furnace walls strongly limits thermal Exchange, reduces furnace capacity and is responsible for inclusions in metal and casts.
FOUNDRY SCOR Powder fluxes to clean properly furnace walls. Can be used manually or by FLUX INJECTOR.
ROCK FLUX flux in small bricks to float on the molten metal surface.
Dross formation and adhesion to furnace walls strongly limits thermal Exchange, reduces furnace capacity and is responsible for inclusions in metal and casts.
FOUNDRY SCOR Powder fluxes to clean properly furnace walls. Can be used manually or by FLUX INJECTOR.
ROCK FLUX flux in small bricks to float on the molten metal surface.
Product category: Melt additives and covering fluxes for non-ferrous cast alloys
AL - COVERING-DROSSING-DEOXIDIZING FLUXES FOR ALUMINIUM AND ITS ALLOYS AL MG<1%, AL SI 7-13%
Molten Aluminium alloys are subject to oxidation, therefore metal has to be protected during melting cycle by proper fluxes, to avoid hydrogen absorption from ambient atmosphere.
During the process, using proper fluxes, mixed with molten metal, allow to eliminate oxides inside molten metal, to improve metallurgical properties.
Drossing fluxes allow to eliminate oxides and dross, created during melting and previous treatments.
Metallurgical treatment improves mechanical properties of the alloy, allow for inclusion free casts, reduces metal inside dross, avoid oxidation during holding time.
FOUNDRY SCOR Powder fluxes for covering, drossing, deoxidizing treatments.
ECOSAL granulated fluxes series covering, drossing, deoxidizing treatments. Can be used manually or by LAMPI FLUX INJECTOR.
FOUNDRY SX-DX-DEOX cans (patented system). Aluminium cans series, containing covering, drossing and deoxidizing fluxes. Added manually or via MDCD/ADCD degassing unit.
ROCK FLUX in small bricks for covering, drossing and deoxidizing treatments. Specifically used for melting of scraps and foundry internal recycling and turning aluminium.
During the process, using proper fluxes, mixed with molten metal, allow to eliminate oxides inside molten metal, to improve metallurgical properties.
Drossing fluxes allow to eliminate oxides and dross, created during melting and previous treatments.
Metallurgical treatment improves mechanical properties of the alloy, allow for inclusion free casts, reduces metal inside dross, avoid oxidation during holding time.
FOUNDRY SCOR Powder fluxes for covering, drossing, deoxidizing treatments.
ECOSAL granulated fluxes series covering, drossing, deoxidizing treatments. Can be used manually or by LAMPI FLUX INJECTOR.
FOUNDRY SX-DX-DEOX cans (patented system). Aluminium cans series, containing covering, drossing and deoxidizing fluxes. Added manually or via MDCD/ADCD degassing unit.
ROCK FLUX in small bricks for covering, drossing and deoxidizing treatments. Specifically used for melting of scraps and foundry internal recycling and turning aluminium.
Product category: Melt additives and covering fluxes for non-ferrous cast alloys
AL - COVERING-DROSSING-DEOXIDIZING FLUXES FOR ALUMINIUM AND ITS ALLOYS AL MG>1%, AL SI >13%, AL SI TREATED WITH SR
Molten Aluminium alloys are subject to oxidation, therefore metal has to be protected during melting cycle by proper fluxes, to avoid hydrogen absorption from ambient atmosphere.
During the process, using proper fluxes, mixed with molten metal, allow to eliminate oxides inside molten metal, to improve metallurgical properties.
Drossing fluxes allow to eliminate oxides and dross, created during melting and previous treatments.
Metallurgical treatment improves mechanical properties of the alloy, allow for inclusion free casts, reduces metal inside dross, avoid oxidation during holding time.
FOUNDRY SCOR Powder fluxes for covering, drossing, deoxidizing treatments.
ECOSAL granulated fluxes series. Covering, drossing, deoxidizing treatments. Can be used manually or by LAMPI FLUX INJECTOR.
FOUNDRY SX-DX-DEOX cans (patented system). Aluminium cans series, containing covering, drossing and deoxidizing fluxes. Added manually or via MDCD/ADCD degassing unit.
ROCK FLUX in small bricks for covering, drossing and deoxidizing treatments. Specifically used for melting of scraps and foundry internal recycling and turning aluminium.
During the process, using proper fluxes, mixed with molten metal, allow to eliminate oxides inside molten metal, to improve metallurgical properties.
Drossing fluxes allow to eliminate oxides and dross, created during melting and previous treatments.
Metallurgical treatment improves mechanical properties of the alloy, allow for inclusion free casts, reduces metal inside dross, avoid oxidation during holding time.
FOUNDRY SCOR Powder fluxes for covering, drossing, deoxidizing treatments.
ECOSAL granulated fluxes series. Covering, drossing, deoxidizing treatments. Can be used manually or by LAMPI FLUX INJECTOR.
FOUNDRY SX-DX-DEOX cans (patented system). Aluminium cans series, containing covering, drossing and deoxidizing fluxes. Added manually or via MDCD/ADCD degassing unit.
ROCK FLUX in small bricks for covering, drossing and deoxidizing treatments. Specifically used for melting of scraps and foundry internal recycling and turning aluminium.
About us
Company details
FOUNDRY ECOCER stands as one of the major Italian companies for the production and marketing of products and auxiliaries for non-ferrous alloys foundries.
Maurizio Sala founder, with proven experience in multinational companies leaders in the business, holds the office of President.
Maurizio Sala, together with his son Fulvio (CEO of the Company), who is in charge of all operational activities, defined the target for the Company “Providing excellence for the foundry industry”.
The commitment to invest in the improvement of facilities and development of resources, in order to obtain an excellent level in customer service, is built in the management.
Maurizio Sala founder, with proven experience in multinational companies leaders in the business, holds the office of President.
Maurizio Sala, together with his son Fulvio (CEO of the Company), who is in charge of all operational activities, defined the target for the Company “Providing excellence for the foundry industry”.
The commitment to invest in the improvement of facilities and development of resources, in order to obtain an excellent level in customer service, is built in the management.